Panasonic Electric Works Nordic AB
MEW01349
Rev: -
Operating Instructions Fire alarm system EBL512 G3, V1.1.x
152
35
How to change paper in the printer
When the paper roll is almost empty, a red line appears on one edge of
the paper. Change the paper roll before it is completely empty!
Always have a spare paper roll on site (paper width 58 mm).
Change the paper roll as follows:
Read all instructions before changing the paper roll.
Open the control unit door.
Open the printer cover, i.e. press the green illuminated
release button (in the middle) on top of the printer front.
Remove the remains of the old paper roll.
Place the new paper roll in the printer. Make sure that it
unrolls in the proper direction – like the old one.
Pull out 50 mm paper and close the cover.
Tear off the paper, then press the Paper feed button (to the
right) on top of the printer front, to check the paper feed
function and tear off the paper.
Close the control unit door.
