17
Advanced Operations
You may combine cycles as desired, e.g. "wash & rinse" and "spin". (These cycles are not
remembered.)
Before you begin
●
Load clothes in the tub, close the lid; open the water faucets and power on the washing
machine.
1 In “Normal” cycle mode:
Press “Wash”, “Rinse” or “Spin”
key, select desired cycle.
●
Set up washing end time (P.7)
2 Press Start/Pause key.
●
Change water level (P.4)
●
About detergent (P.19)
●
The washing machine beeps after the
washing cycle ended.
Set up operation
Set up
Used for
Operation key
Remarks
Washing only
●
Reuse water left in tub.
Washing
●
Washing water left in tub.
Wash and rinse
●
Reuse water of rinse
Washing
Rinse
●
Rinse water left in tub.
Wash and Spin
●
Washing clothes with
laundry starch
Washing
Spin
Rinse only
●
Rinse clothes after wash
Rinse
●
Rinse water left in tub.
Rinse and Spin
●
Rinse and spinning clothes
after wash.
Rinse
Spin
Spin only
●
Spinning clothes after wash
●
Drain water in tub.
Spin
Note
●
For cycles beginning with "Rinse" or "Spin", the cycle begins with draining in case there is
water left in tub; otherwise, it begins with spinning cycle.
●
After starched, remove starch left in tub with clean water. (Select "Normal" cycle, set water
level to 70 L or more, and run the cycle without any cloth in tub.)
Wash/Rinse/Spin Cycles Individually
To set up water current strengthening function
You may set up current strengthening function to get more powerful water current for washing.
■
How to enable this function
During water feeding in wash cycle and with closed lid
Press and hold "Wash" key for at least 3 seconds
●
The washing machine beeps twice after the current strengthening function is set.
●
You don't need to set up the wash current strengthening function again as it will be remembered by
the washing machine.LED display
Note
●
You may change current strength settings for all cycles except the delicate cloth/tub hygiene ones.
■
How to disable this function
During water feeding in wash cycle and with closed lid.
Press and hold "Wash" key for at least 3 seconds
●
The washing machine beeps quadruple after the current strengthening function is unset.
LED display
.