25
Reference
Before requesting service, make the following checks. If the problem persists, consult the
service center for instructions.
Problem
Check points
Page
W
ash Machine
The washing
machine fails to
start.
●
Is there power outage?
●
Is "On / Off" key pressed?
●
Is power plug connected correctly?
●
Is fuse broken or main switch disconnected?
–
–
–
–
Keys pressed and
failed to response.
●
The "Water level" key is available only in water feeding
and washing cycle.
The "Wash", "Rinse", and "Spin" key is available only
after pressing the "Start / Pause" key before water
feeding and washing cycle is ended. You may have
to power off and on the washing machine once after
settings are changed.
7
Abnormal noise
and vibration.
●
Do not place the washing machine on floor uneven or
unstable.
●
Is it imbalanced with clothes?
→ Press "Start / Pause" key, balance load, resume the
suspended cycle.
24
–
W
ash cycle
No water supplied.
Water pressure too
low.
●
Is faucet opened?
●
Is running water cut or its pressure too low?
●
Is water feeding valve filter jammed by dirt?
→ Clean the water feeding valve filter.
-
-
22
Water level too
high in terms of
load.
●
Water level may get too high by placing soaked cloths
in tub or the tub if left with water before cycle getting
started.
→ Press "Water level" key to change water level.
7
Water level too low
in terms of load.
●
Light clothes of synthetic or blended fibers may get
water level lower.
→ Press "Water level" key to change water level.
7
Rinse cycle
No water feeding
when rinse cycle is
started.
●
The washing machine starts feeding water after drying
cycle in case the tub contains no water.
●
It drains first if there is water left in tub.
–
–
Spin cycle
The washing
machine starts
rinsing during
Spining cycle.
●
The washing machine may auto balance load with
rinsing.
→ Place load in balance.
–
Troubleshooting
