4
Name of Parts / Accessories
Operation panel
* In case foreign matter, water, or detergent is attached to the control panel, please power off the machine before wiping the panel
clean or you may encounter system error.
* Please touch center of key texts to operate the machine. (Do not use rubber gloved hands, fingernails, and pens to tap the touch
screen.)
* Once a desired cycle is set, press Start/Pause to lock keys from invalid behavior due to non-intentional tapping. To change settings,
press Start/Pause key before making any change.
* To change a reservation setup, power and set up again.
* Peel off the protective film before use.
Water level (P.7, 19)
Setting can be changed according
to your preference.
Press the [Water Level] key
repeatedly until the desired
water level indicator lights up.
Wash/rinse/spin
(P.7, 17)
You may also select custom cycle.
Tap the touch control panel
until indicator of desire cycle
lights up.
Cycle indicator
Running cycle is indicated
by flashing light.
Display area
(P.7)
Super dry
(P.18)
Preset
(P.7)
Pulsator
Lid
Level (P.24)
powder detergent inlet (P.20, 22)
Lint filter (P.21)
Power cord (P.24)
Water supply hose (COLD)
(P.22, 23)
Water supply hose (HOT)
Washing/spinning tub (P.22)
Adjustable leg (P.24)
Operation panel
(see below for refence)
Lint filter (P.21)
Liquid detergent/
liquid bleach inlet (P.20)
Balance ring
Softener inlet
(P.20, 22)