26
Error Codes
When the washing machine beeps and “U” and a number appear alternately, make the following
checks.
If the problem still persists, consult your dealer for instructions.
Display
Check points
Page
Unable to drain
Check the water drain hose for any of following problems:
●
Is the hose crushed?
–
Is the end of the water drain hose soaked in water?
–
Is the end of the water drain hose installed at a height of 0.7 m
–
to 1.1 m?
Is the extension hose longer than 2 m?
–
Is the water drain hose frozen?
–
After correcting the problem, restart the operation by opening
→
and closing the lid.
–
The lid is open
Is the lid open?
●
Close the lid.
→
–
Unable to spin/air dry
Are the clothes out of balance?
●
Redistribute the clothes, and close the lid.
→
Is the washing machine wobbly or placed on an uneven surface?
●
After correcting the problem, restart the operation by opening
→
and closing the lid.
15
6, 9
Unable to supply water
Check for any of the following problems:
●
Are the water taps turned on?
–
Is the water supply cut off?
–
Is the water pipe or are the water supply hoses frozen?
–
Are the water supply filters clogged?
–
After correcting the problem, restart the operation by opening
→
and closing the lid.
25
23
Child Lock
If the amount of water in the tub exceeds a certain level when the
●
lid is open and Child Lock is set, you will hear warning beeps. If
you leave the washing machine with the lid open for another
10 seconds, “U99” appears and draining starts automatically. To
stop the draining, disconnect the power plug, wait for 5 seconds,
and reconnect it.
If the draining does not stop even after you have performed the
procedure above, check if the water drain hose is connected
correctly.
5
7
When “H” and a number appear alternately, service is required.
Display
Check points
Check the displayed number (two-digit number following “H”), disconnect
●
the power plug, and consult your dealer for service.
1$)6B*BHQJLQGG
