Operation
ECONAVI Operation
Model :
The refrigerator detects the opening and closing of the refrigerator door and the brightness
around the refrigerator to automatically control operation to ensure maximum energy saving.*
1
ECONAVI operation
●
The refrigerator learns the lifestyle patterns of your family
from door opening and time periods of infrequent use to
maximise energy ef
fi
ciency.
●
The refrigerator learns your lifestyle patterns from the
previous 3 weeks of use and uses that data from the
4
th
week onwards.
Therefore the ECONAVI lamp “ON/OFF” pattern may
change from the 4
th
week onwards.
●
The refrigerator performs the ECONAVI energy saving
operation when it becomes dark*
2
around the refrigerator
such as overnight when you are asleep.
●
The brightness of the ECONAVI lamp is lowered
approximately 5 minutes after it is lit.
Settings for enabling ECONAVI operation
●
ECONAVI operation is automatically enabled when the temperature control for both the
freezer and refrigerator compartment is set to “Med”.
●
ECONAVI mode does not operate if the [Quick Freezing] mode is in operation.
●
It is not possible to force to start of the ECONAVI mode.
Remark
*
1
The effectiveness of the ECONAVI mode is dependant on the ambient temperature,
ambient brightness and the number of times the refrigerator door is opened and closed and
the state in which food is stored.
*
2
Darkness is detected by the light intensity sensor at approximately 3 lx to 10 lx or less.
Model :
This model also has ECONAVI mode, but it does not feature ECONAVI lamp and light
intensity sensor.
Prime Fresh +
How to operate the “Prime Fresh +” mode
1
Model :
Press the button “Prime Fresh” until the light LED “Prime Fresh +” turns on.
2
Model :
Press the button “Select” until the light “Prime Fresh” turns on, then press button “Temp
Control” until the light LED “Prime Fresh +” turns on.
Remark
●
If you want to stop the operation immediately, please repeat step
1
or step
2
until the light
LED turns off.
●
The system will stop the operation automatically when it runs for 105 mins (as ambient
temperature is below 18 °C) or 150 mins (as ambient temperature is above 18 °C) and
return to normal mode (the LED turns off)
●
The LED
fl
ashing means that the defrosting system is now working. “Prime Fresh +” mode
will start right after the defrosting operation is
fi
nished.
ECONAVI Lamp
Light intensity sensor
13
ARAH1E201010_EN.indd 13
ARAH1E201010_EN.indd 13
2019/12/13 10:57:20
NR-BX460 (WKVN, WSVN)
NR-BX410 (WKVN, WPVN)
NR-BX460 (WKVN, WSVN)
NR-BX410 (WKVN, WPVN)
12/19/2562 BE 10:16
