Installation
9
Do not peel the seal on the back.
Otherwise, the cooling
performance may
deteriorate. If you have
peeled it, then cut a
cloth packing tape into
a square and paste it
onto the refrigerator.
Requests and notices
Refrigerator doors should not be opened
during the interior cooling process.
The doors should not be
opened until the interior
has been cooled down
suf
fi
ciently. (Warm air
fl
owing into the interior
will block the cooling
function.)
Please wait until the interior has cooled
down.
●
It may take approximately four hours to
cool down the interior.
●
It may take 24 hours or more to
cool down the interior and achieve
equilibrium in the summer, etc.
M
Have any measures taken
against tipping due to
earthquakes?
In order to prevent the
refrigerator from tipping,
permanently
fi
x it by using
belts, etc.
Fix the refrigerator.
Turn the adjuster
bolts (right and left)
until they reach the
fl
oor to stabilize the
refrigerator.
L
If the door is slanted downwards.
Turn the adjuster bolt on the lower side, as shown
in the diagram, in order to adjust the level.
●
The freezer/refrigerator doors may tilt within four
to
fi
ve days after installation due to the load of the
food or adaptation to the
fl
oor surface, turn the
corresponding adjuster bolt with the dedicated
tool.
Seal
●
Dedicated tool
(Accessories)
ARAH0A106620_EN.indd 9
ARAH0A106620_EN.indd 9
5/22/2562 BE 14:11
5/22/2562 BE 14:11
