Installation
5
Do not peel the seal on the back.
Otherwise, the cooling
performance may
deteriorate. If you have
peeled it, then cut a
cloth packing tape into
a square and paste it
onto the refrigerator.
Requests and notices
Do not open/close the doors during the
interior cooling process.
Do not open/close the doors
until the interior has cooled
down suffi ciently. (Warm air
fl owing into the interior will
block the cooling function.)
Please wait until the interior has cooled
down.
●
It may take approximately four hours to
cool down the interior.
●
It may take 24 hours or more to
cool down the interior and achieve
equilibrium in the summer, etc.
●
Ice-making starts only after the interior
has been cooled down suffi ciently.
M
Have any measures taken
against tipping due to
earthquakes?
In order to prevent the
refrigerator from tipping,
permanently fi x it by using
belts, etc.
Fix the refrigerator.
Turn the adjuster
bolts (right and left)
until they reach the
fl oor to stabilize the
refrigerator.
L
If the door is slanted downwards.
Turn the adjuster bolt on the lower side, as
shown in the diagram on the left, in order to
adjust the level.
●
The freezer/refrigerator doors may tilt
within four to fi ve days after installation
due to the load of the food or adaptation
to the fl oor surface, turn the corresponding
adjuster bolt with the dedicated tool to
adjust and level the door again to restore.
When the door is lowered.
Lower the right
adjuster bolt for
the right door.
Lower the left
adjuster bolt for
the left door.
●
Dedicated
tool
Seal
AK-177470_T0217-0_EN.indd 5
AK-177470_T0217-0_EN.indd 5
1/28/17 10:12 AM
1/28/17 10:12 AM
