4.2 Assembly Instructions
1. Arrange Lead wire into rib of Press plate as shown in Figure 13.
(Figure 13)
･
Arrange Lead wire into rib of Housing A as shown in Figure 14.
(Figure 14)
2. Assembly Housing B together with Housing A as shown in Figure 15.
・
Ensure that the power cord is attached to the connector cover.
(Apply grease floil at the power cord terminal )
(Figure 15)
3. Fixing Shaft cover follow hook direction as shown in Figure 16.
(Figure 16)
Lead Wire Blue
Lead Wire Green
Lead Wire Green
Lead Wire Orange
Lead Wire Blue
Lead Wire Green
Lead Wire Green
Lead Wire Orange
Connector cover B/K
Connector cover B/K
Power Cord
Long hook
Short hook
Long socket
Short socket
