14
English
Troubleshooting
Problem
Possible cause
Action
During use, the unit gives off a burning
smell.
Dust etc. are adhered to the Iron Plate.
Clean the Iron Plate to
remove any adherents.
The Iron Plate does not get hot.
The cord is disconnected.
Stop using immediately.
The main body is partially deformed.
If the Power cord is bent or twisted,
sometimes the power turns off.
It takes time to reach operating temperature.
The time to reach operating
temperature (approximately 100 °C)
differs depending on the area.
100 - 130 V: about 60 seconds
220 - 240 V: about 15 seconds
If problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic
for repair.
EH-HV20_ASIA_EN.indb 14
EH-HV20_ASIA_EN.indb 14
06/07/2015 07:18:31 PM
06/07/2015 07:18:31 PM