16
English
Troubleshooting
Problem
Possible cause
Action
After pressing the Power Switch, the LED
Temperature Level Display does not blink.
The length of time you pressed the
Power Switch was not enough.
Press and the hold the Power
Switch for approximately 1
second to turn on the
straightener.
The temperature is not changed even
though the Temperature Level Adjustment
Switch is pressed.
The Temperature Level Adjustment
Switch has been locked.
Press the Temperature Level
Adjustment Switch “-” 2 times.
During use, the unit gives off a burning smell.
Dust etc. are adhered to the Iron Plate.
Clean the Iron Plate to remove
any adherents.
If the Power cord is bent or twisted,
sometimes the power turns off.
Stop using immediately.
All the LED Temperature Level
Displays blink.
It takes time to reach operating temperature.
The time to reach operating
temperature (approximately 100 °C)
differs depending on the area.
100 - 130 V: about 45 seconds
220 - 240 V: about 15 seconds
If problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic
for repair.
EH-HV51_CIS(EN).indb 16
EH-HV51_CIS(EN).indb 16
23/03/2015 08:49:01 AM
23/03/2015 08:49:01 AM
