14
English
Maintaining the air inlet
Do this regularly, at least once a month.
Air inlet
1. Rotate the air inlet (filter)
counterclockwise and pull it out to the
cord.
2
1
2. Remove any dust or hair using a
standard toothbrush or vacuum
cleaner.
3. Insert the filter to the air inlet and
rotate clockwise to reattach it.
1
2
Maintaining the air outlet
Do this about once a month or over.
1. Plug into the household outlet.
2. Press down on the Cool Shot switch
and slide it to [ ].
3. Select [ ] or [ ] with the power
switch.
While scraping dust and hair
jammed in the mesh with a tooth
brush, blow them away with air.
►
Notes
•
When performing maintenance, do not block the air inlet with
your hand.
•
During or after maintenance of the air outlet, dust, etc. may
scatter. Ensure that the hair styler blows no dust, etc. from the
air outlet before using. (Do not look into the air outlet.)
Maintaining the nanoe™ outlet
At least once a month
In order to maintain the generation amount of nanoe™.
1. Prepare a commercially available
new cotton swab.
2. Gently insert the swab in the
nanoe™ outlet until it stops (about
10 mm), and then turn the cotton
swab 2‑3 times carefully.
►
Note
•
It is easier to clean the nanoe™
outlet with a narrow cotton swab (for
example, one intended for babies).
nanoe™ outlet
Gently rub the tip of
the needle portion
Summary of Contents for EH-KN8C
Page 1: ...Operating Instructions Household use Hair Styler Model No EH KN8C English 3 17 ...
Page 2: ...2 ...
Page 17: ... 17 MEMO MEMO ...
Page 18: ...18 MEMO MEMO ...
