10
English
Maintainingthenanoe™outlet
•
Use commercially available cotton swabs. (We recommend
the thin cotton swabs made for use with babies.)
•
This maintenance allows the hair dryer to sustain the
generated level of nanoe™ over a long period.
1. Dampen the end of the
cotton swab with tap
water.
2. A needle portion is
located deep within the
nanoe™ outlet. Using the
swab, rub this portion
gently about 5 times.
Platinum ion outlet
nanoe™ outlet
Gently rub the tip of
the needle portion
cotton swab
Do not attempt to clean the platinum ion outlet (
C
). (The
outlet has a structure which makes it difficult to insert the
swab.)
Doing so results in losing its ability to release platinum ions.
Maintainingtheairinlet
Wipe to clean lint, hair, or other
matter from the air inlet with a tissue.
•
Do not press or rub the air inlet with
a nail or other sharp object. Doing
so may damage the air inlet.
Maintainingtheairoutlet
•
The hair dryer should be plugged into the household outlet
only in case of maintenance for the air outlet.
•
Use a commercially available toothbrush.
•
Switch the temperature selector
to “Cool” and blow away the
dust etc. as you scrub with the
toothbrush.
•
During maintenance, do not
block the air inlet with your
hands etc.
•
Be careful when using the hair
dryer for the first time after
maintenance, since it may blow
out dust etc.
Scrub to remove any
dust, hair etc. blocking
the mesh.
