English
How to use the hair dryer
1
1
Select the intensity of the airflow with the main
switch.
Notes
Before using the hair dryer, first set the main switch to
position “0”, then plug into a power outlet and turn on the
main switch.
Repair and maintenance of the hair dryer
Only qualified personnel should repair or disassemble the
hair dryer.
If the cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified persons
in order to avoid a hazard.
If the cord or plug is damaged, stop using it immediately and
contact an authorized Panasonic service center.
When the hair dryer is blowing hot air, occasionally air may
turn cool or sparks may be seen. In such cases, dust may
have accumulated at the air inlet and/or the air outlet. Also,
the air inlet may be being blocked by your hair, hands, etc.
(This phenomenon is the result of the hair dryer’s thermal
switch. It is a protective device. The sparks do not pose a
danger in and/or themselves.) Slide the main switch to the “0”
position and remove any dust that has accumulated.
Maintenance of air outlet and air inlet (once a
month or more)
To clean the air outlet, set
the main switch to “1”, and
rake out with a brush while
cool air is blowing out.
●
•
•
•
•
•
●
•
To clean the air inlet, set the main switch to “0” and, with the
airflow stopped, remove dust and hairs using a brush or
vacuum cleaner.
Be careful since dust may spray out.
Specifications
Model No.: EH‑ND5/EH‑ND51
Voltage
0 V
50 Hz
Power
consumption
EH‑ND52
1500 W
EH‑ND51
1300 W
Accessory
Nozzle
This product is intended for household use only.
CAUTION!
Failure to follow these safeguards could result in
injury to fingers.
When extending the handle
When folding the handle
DO NOT TOUCH the
shaded area in the
diagram below when
holding the handle or using
the hair dryer.
DO NOT TOUCH the
shaded area in the
diagram below when
folding the handle.
•
•
EH-ND52_51_ME.indb 4
2011/07/04 9:54:46
