Panasonic EH-NE35, Operating Instructions Manual

21

English

Maintenance of the hair dryer

Maintenance of the hair dryer

Maintenance of the main body

Maintenance of the main body

· 

Set the main switch to “0”, disconnect the power plug 
from the household outlet. (Except when 
performing maintenance on the air outlet). Wipe it 
with a wet cloth soaked in liquid soap. Do not use 
paint thinner, benzene, alcohol, etc., to clean the unit. 
Doing so may cause failure, cracking or discoloration 
of the main body. 

Maintenance of the air outlet and air inlet (once 

Maintenance of the air outlet and air inlet (once 
a month or more)

a month or more)

· 

The hair dryer should be plugged 
into the household outlet only in 
case of maintenance for the air 
outlet. To clean the air outlet, set the 
temperature selector to “   Cool air” 
and the main switch to “2 Dry (Strong 
airfl ow)” or “1 Set (Gentle airfl ow)”, 
and rake out with a brush while cool 
air is blowing out. Be careful of dust 
that may be blown out.

· 

To clean the air inlet, set the main 
switch to position “0” and, with the 
airfl ow stopped, remove dust and 
hairs using a brush or vacuum 
cleaner.

Maintaining the ion outlet

Maintaining the ion outlet

EH-NE25/24/ENE2 only

EH-NE25/24/ENE2 only

If sparks occur in the ion outlet, the electrode may be 
dirty, causing abnormal discharging. In this case, clean 
the parts in the ion outlet by the following procedure.

·

 Switch off the hair dryer and unplug it from the 

household outlet before cleaning.

·

 There is a pin in the ion outlet. Use a cotton swab to 

gently wipe the tip portion (about 5 times).

·

 A thin cotton swab is recommended. A regular 

cotton swab may work, but its thick head may be 
diffi cult to insert.

·

 Do not clean or touch parts in the ion outlet with a 

hard object, as this may cause deformation, 
emission degradation, or other risks.

Gently wipe the pin tip

Cotton swab

Ion outlet

Note:

EH-NE35 only

EH-NE35 only

· 

Do not try to clean the platinum ion outlet. (It is 
strongly advised not to clean here by inserting a 
cotton swab.)
Doing so may cause it lose the function of emitting 
the platinum ion.