11
English
Maintaining the air inlet
Clean the air inlet once a month or over.
Ɣ
When dust etc. has built up, detach the filter from the hair dryer
and remove the dust etc. using a toothbrush or vacuum
cleaner.
Ɣ
Use a commercially available toothbrush.
1. Pull on the catch on the
bottom side of the filter
to detach.
2. Remove any dust etc. adhered to the filter or air inlet grille.
Ɣ
Remove the dust etc. adhered to the outside of the filter
using a vacuum cleaner. If this does not remove the dust,
use the thick part of your fingers to push the dust etc.
through the fine mesh on the internal side towards the metal
mesh on the external side, and scrub away carefully with a
toothbrush.
Ɣ
Using the toothbrush, carefully scrub away any dust etc.
from the internal side of the filter.
Ɣ
Using a vacuum cleaner or toothbrush, carefully remove any
dust etc. adhered to the air inlet.
Ɣ
Rubbing forcefully with your nails may tear the filter, so
please use a toothbrush.
Filter
Catch
3. Attach the filter securely,
starting with the upper side.
Ɣ
Keep pressing until you hear
a “click” from both upper and
lower catches.
Summary of Contents for EH-NE84-K865
