14
Notes
Depending on the type of facial cleanser (sticky
facial cleansers, etc.) or the amount used, the
facial cleanser may not mix properly and clog the
appliance. In rare cases, power to the appliance
may be interrupted. (See Page 20.)
Foaming result varies depending on the type of
facial cleaner used. Please use a recommended
amount indicated on your facial cleaner product.
Do not add anything other than facial cleanser into
this appliance.
(Doing so may cause malfunction.)
3. Fill the brush head protective
cover with water (approximately
4 mL) and pour into the center
of the attachment.
4 mL
4. Press
the facial cleanse switch and select a
mode.
Foam starts to discharge approximately 5 seconds
after turning on the appliance.
Press the facial cleanse switch to choose a power
option in the following order: 'NORMAL
'
'
SOFT
'
'
POWER OFF'.
The mode is always set to 'NORMAL' when the
power is turned on.
ψ
POWER OFF
ϊ
ψ
NORMAL
ϊ
ψ
SOFT
ϊ
Wash off any excess facial cleanser on your hands.
Notes
The recommended ambient temperature for
operation is not lower than 5 °C.
The appliance might not be usable out of the
recommended temperature range.
The power supply is cut off automatically in about 1
minute after the power switch is turned on.
Notification timer feature
Notifies you of the recommended washing time by
stopping and restarting every 20 seconds.
Inject the liquid or powdery
cleanser through the center of
the attachment (brush head). (It
may flow out of the hole in the
front of the main body if injected
through the compartment.)
Attachment center