9
Charging
1. Open the socket cover and
insert the appliance plug
into the socket.
Wipe off any water in the
socket.
2. Set the main body on the
stand.
3. Plug in the adaptor into a
household outlet.
4. Check that the charging
indication/notification
lamp glows.
While charging
Red light glows.
Red light goes off.
After charging is
completed
The charging
indication/notification
lamp glows (red).
Charging completes in about 2 hours.
The charging time may vary depending on the
charging capacity.
To check if charging is completed
When the power adaptor is connected in the fully
charged state, the charge indicator/notification lamp
will glow and go out after about 5 seconds.
5. After charging is completed, unplug the adaptor
from the household outlet, and unplug the
appliance plug from the main body.
(for safety and to reduce energy usage)
It will not cause damage to the main body even if
the charging time exceed 2 hours or more.
About charging
The charging time may differ for the first time usage
or if it has been idled for half a year or more. The
charging indication/notification lamp may not glow
during the first few minutes after starting to charge the
appliance. Please charge the appliance continuously
and the charging status lamp will illuminate shortly.
Notes
You can place two attachments or brush heads on
the stand.
To protect the brush hair when the product will not
be used for a long time or will be taken with you,
install the brush head protective cover on the dry
brush beforehand.