E27
English
Q:
Why doesn't the backrest return to its original position after finishing the massage?
A:
When the massage ends with the timer, in accordance with the settings, the backrest does not become upright to
maintain the reclining position.
To return the massage lounger to its original position, press the
button on the controller twice and the chair
will automatically returns to its original position.
Q:
The sole shiatsu is too intense…
A:
Use the
button to change the intensity to [1].
In addition, the sole shiatsu intensity is diminished by lowering the leg/foot massage section.
Q:
When using the unit, how much power is consumed per month?
A:
If the unit is used 30 minutes (15 minutes a time, twice a day) per day for 31 days a month, the power consumption is
about 2 kwh.
Q:
The operating sound is noisy...
A:
The unit makes sounds such as operating sounds of the massage function due to its structure.
(See the top of page E29 for details)
It may be a malfunction if the sound becomes louder, so please request a dealer for an inspection/repair.
Q:
Is the sound using the leg/foot massage normal?
A:
For the leg/foot massage of this product, the massage is reformed by using air pressure. The product’s internal air
pump pumps air, and the solenoid valve intakes and exhausts the air. Thus, generated sound is not a problem.
If the sound is extremely loud, the massage lounger might be malfunctioning. If this occurs, request the dealer or
service center to carry out an inspection and repairs.
Q:
What should I be careful of when transporting the unit, such as in a move?
A:
Please be careful of the following points.
Make sure the backrest is fully reclined to facilitate the
•
transport.
Do not move the unit with a person sitting on it.
•
1. Press the
button to turn on the power.
2. Press the
buttons to fully recline the backrest.
Keep pressing these two buttons until you hear a beeping
sound.
* You will hear a beeping sound when the leg/foot
massage section is folded away, but keep pressing the
buttons until the backrest is fully reclined.
3. Press the
button to turn off the power and remove the power plug from the outlet (See page E24)
If packing carton is not available, use packing material to protect the unit from scratches and as an anti-vibration
•
measure, and handle with care.
When packing the unit, check that the power cord is not tangled around the unit, and place it on the seat so that it
•
does not drag on the ground while moving the unit.
