EN14
1
Press the
button to turn on the power.
(The power will turn off automatically if you do not select a menu or start a leg/
foot massage within 3 minutes after turning on the power.)
2
Select a menu from among
“FULL BODY”
,
“
SELECTED AREA
”
and
“
MANUAL
”
operation.
FULL BODY
(See page EN15.)
You can select from among 4 programs for automatically loosening
from neck to lower back.
The leg/foot (heat/air) massage begins simultaneously.
•
SELECTED AREA
(See page EN18.)
You can select “NECK SHOULDER” or “LOWER BACK”.
The leg/foot massage begins simultaneously.
•
MANUAL
(See page EN19.)
You can concentrate the massage on desired areas.
When using the leg/foot (Heat/Air) massage only
To start the leg/foot massage
Press the
button.
(See step 2 on page EN21.)
SELECTING A MENU AND STARTING THE MASSAGE
If the power of the main unit is turned off
or if the power plug is removed, the
massage heads may automatically move
when being used next time.
When the massage
heads are moving,
the following display
appears. This is not
a malfunction.
The unit can be used
as normal after the
massage heads
move for a while.
1
2
English
•
Be sure to start on the gentle massage program “RELAX”
when using the unit for the first time.
•
The unit must not be used for more than a total of 15 minutes.
•
Avoid massaging any one part of your body for more than 5
minutes at a time.
•
After 15 minutes of use, we recommend that you take a 10
minute break.
•
Use the unit up to twice per day, for a total of 30 minutes.
Failure to observe this may result in an adverse effect or injury.
WARNING
