EN8
English
SETTING UP THE UNIT
TO START WITH (INSTALLATION LOCATION)
Before taking the unit out of the box, decide where it is going to be set up.
Ensure that there is enough space for the unit power switch to be operated. (Approx. 10 cm of space in both the rear and on both sides)
Area where the unit and leg/foot massage section
Depth Approx. 178 cm
(When the leg/foot massage section is raised : Approx. 188 cm)
Depth Approx. 157 cm
Depth Approx. 150 cm
More than 10 cm
(When the backrest
is fully upright)
Width
Approx. 78 cm
Mat
Keep at least 3 cm away from the wall.
(When the backrest is fully reclined)
Do not expose the massage lounger to direct sunlight or high temperatures, such as in front of heating sources, because this
•
can cause discoloration or hardening of the synthetic leather.
Make sure to install the unit so that the back side of the main unit does not touch the wall or any objects. (Failure to do so may
•
cause damage such as the back side deformation.)
•
least 63 cm × 104 cm) to cover the areas where the unit touches and where the leg/foot massage section could touch the
Install the unit near a power outlet.
•
EP-MA03.indb 8
2012/07/09 17:42:42
touch the floor Approx. 102 cm