EN23
❷
After selecting the program,
press
. The product will
be automatically adjusted to
the massage position.
When there is a beep and the
sign
on the LCD of the remote controller
is flickering, the massage wheels
may be adjusted to the shoulders.
●
There are 19 heights showing the shoulder positions.
After the shoulder position is well
adjusted, press
to start massage.
(Even if OK is not pressed, the product will start the program
automatically 15 seconds later.)
●
After the shoulder position is determined, the Lower Leg/
Foot massage section will probably raise according to
difference between the body height and the actual height.
(To enable the feet to reach the foot massage area when
both the lower leg warm massage and the foot warm
massage function are used)
●
When the Automatic Programs is running, the shoulder
position can be adjusted at any time.
(If the Random massage mode is selected, shoulder position
cannot be adjusted.)
●
When the Automatic Programs is running, the product can enter
or exit the shoulder position adjustment mode through
▲
or
▼
.
Massage position
Inclination angle: About 18
°
[Adjustment mode of shoulder position]
<Adjustment method>
Adjust the
shoulder position
through
▲
or
▼.
The massage wheels will
move for about 1.5 cm
after each pressing.
Raising angle: About 35
°
●
If inclination angle of the product is larger than
angle of the massage position, the product will
not back to the correct position automatically.
Lean the head on the back cushion.
When the body
’
s areas in contact
with the massage wheels decrease,
the massage wheels will stop rising.
Massage
wheels
The massage wheels will move up slowly
and beep at the same time.
Massage
wheels
Maximum: 19
Minimum: 1
■
Note
<Standard of shoulder position>
Too high
Appropriate
(Where the beats
of the massage
wheels can be felt)
Too low
Select the
Automatic Programs massage mode
Summary of Contents for EP-MA32
