Question
Answer
During operation
(continued)
Reclining
The angle of the backrest, legrest
or armrest automatically changes
at times.
The angle automatically changes in the following cases.
⁃
While scanning the shoulder roller position
The unit body moves automatically, and gets inclined to the
angle that makes scanning easy.
●
The movement is not made when the unit body is inclined deeply.
Reclines
around 20°
Raises
around 60°
⁃
When
is pressed to end the massage.
The chair automatically returns to the upright position.
●
Only the legrest returns to the original position if the massage is
completed according to the timer.
●
If
is pressed to end the massage, all operations immediately
stop and the angle does not automatically change.
The backrest is not restored to
upright position after massaging.
Only the legrest is retracted when the motion comes to stop by
timer operation.
Press
twice to restore the backrest to the upright position.
After use
Hand & arm
Red marks are left on the under
side of my hands/arms after a
hand & arm massage.
Marks may remain on the hands and arms after use.
These eventually fade and are not a problem.
How to adjust the <Position>
Scanning of shoulder roller position*
The correct shoulder position
cannot be found during scanning
of shoulder roller position.
(The shoulder position slips each
time.)
Correct scanning of shoulder roller position may not be possible
for some sitting positions (such as leaning forward).
Adjustwiththeshoulderposition"▲"and"▼"button.(EN20toEN21)
For more correct scanning, sit firmly in the unit and lean back gently so
that your head is touching the pillow (backrest).
▶
Continued on the next page
Q&A
EN41
Summary of Contents for EP-MAK1
Page 99: ... MEMO ...
