9
English
10
English
3 Attach the controller holder, and insert the controller
1
Velcro fasteners
2
4 Put the backrest cushion in place
5 Connect the power cord to the unit
Power switch section
Power cord
Appliance inlet
Connector
1
Check for dirt and damage on
appliance inlet of the power switch
section and the connector of the
power cord.
2
Insert the connector into the appliance
inlet.
3
Be sure to push the connector in all
the way.
BEFORE EVERY MASSAGE (CHECK THE UNIT)
1
Remove the backrest cushion.
Check
Unfasten the zippers
(3 locations) and fold
down the back pad
2
Make sure there are no tears or rips in
the fabric.
See Caution No. 10 on page 2.
Check
3
Make sure the massage heads are in
the retracted position and then replace
and fasten the back pad.
See Caution No. 3 on page 2.
When the massage heads are not in the retracted
position
After step 7, press the
button on the controller
twice to return the massage heads to the retracted
position.
•
9-10
2010/01/20 13:28:50
