8
CAUTION
• Do not move the unit while someone is seated on it.
Failure to do so may cause the unit to tip over, which may lead
to damage or injury.
HOW TO MOVE THE UNIT
1. Plug the power plug into an electrical outlet.
2. Verify that the lock switch key is turned to the
“open” position.
• If in “lock” position, turn the lock switch key to “open”.
3. Slide the power switch to the “on” position.
POWERING UP THE UNIT
1. Attach the back cushion using the
zipper.
2. Attach the pillow using the fasteners.
3. Attach the rear leg cover.
* Do not step on the attached rear leg cover.
ATTACHING THE BACK CUSHION, PILLOW AND REAR LEG COVER
Wheels
Hold
the legrest.
Move it slowly
Using the wheels to move the unit
• Grasp the legrest to move the unit when using the wheels.
• It is easier to move the unit with the massage heads retracted and
the backrest in the upright position.
* Place a mat or cloth on the floor and move the unit slowly to
prevent floor damage.
Lifting the Unit
• Move the chair by having one person hold the legrest and another
person use the handles on the back.
* Please hold the handles and legrest securely to avoid dropping
the unit as it may damage your floor.
1
3
2
4" (10cm)
• Place cover against
chair approx. 4 in.
(10 cm) above pipe
section.
• Slide cover down to
position shown by
broken line.