15
4. Adjusting manual massage settings
Adjusting the Vertical Position of the Massage Heads
Adjusting the Width between Massage Heads
Adjusting Massage Speed
E.g. 2 Changing to a massage type outside the category.
(Changing to Tap when Knead is selected.)
• When Knead is combined with Tap, deselecting Knead will leave only Tap.
Press
Press
Massage heads up
Massage heads down
Increasing the width
Decreasing the width
Increasing
massage speed
Decreasing
massage speed
5. Auto shut-off in manual operation
• The massage will end after approximately 15 minutes and the unit will automatically shut off.
• The massage heads will move to the retracted position and stop.
• The OFF/ON indicator will flash until the heads have stopped moving.
• If you want to continue using the massage lounger, please press the OFF/ON button. Please rest at least 10
minutes between massages.
NOTE:
• A built-in timer prevents overuse of the unit.
• When using manual operation, the timer automatically stops operation after 15 minutes.
* If you want to continue to use the unit, we recommend that you have a break of at least 10 minutes between
massages to allow your body to rest.
• The massage heads will move a little each time the button is
pressed. If you hold down the button, the massage heads will
continue to move until you release the button. When the
massage heads reach their limit you will hear a “beep-beep-
beep” sound.
• Tap, Soft Shiatsu, Full Roll, and Regional Roll can be
adjusted in 3 steps.
• The massage heads will move a little each time the button is
pressed. If you hold down the button, the massage heads will
continue to move until you release the button.
• When the massage heads reach their limit you will hear a
“beep-beep-beep” sound.
• Massage speed is adjustable in 5 steps.
• When the massage speed reaches its maximum or minimum
limit you will hear a “beep-beep-beep” sound.
Stopping mid-way through a massage
• Press the OFF/ON button.
• The massage heads will return to the retracted position and stop.
Press
Press
