16
Before sitting down
Check the following before using the unit
1
Check the surrounding area
Make sure there are no objects, people, or pets in the vicinity of the unit.
2
Check the power cord and the power plug
Warning
Remove dust from the power plug periodically.
Failure to observe this precaution may result in
defective insulation of the cord due to moisture.
Clean dust from the cord using a dry cloth.
Do not damage the power cord and the power
plug.
(Do not damage, expose to heat sources, bend,
twist, pull forcibly, bundle or place heavy objects
on the cord.)
Using a damaged power cord and/or the power plug
may result in electric shocks, short circuits, or fires.
Ask your sales dealer to repair the power cord and/or
the power plug, or contact a customer service center.
•
•
3
Switching on the power supply
1. Insert the power plug into an electrical outlet.
2. Turn the lock switch key to the “open” position.
3. Slide the power switch to the “on” position.
Warning
Insert the power plug firmly until it stops
completely.
Failure to observe this precaution may result in
electric shocks or fires due to heat generation.
Do not exceed the rated values of the plug and the
wiring or use any voltage other than the rated
voltage. (The unit cannot be used abroad or used
with a transformer.)
Failure to observe this precaution may result in
electric shocks, malfunctioning or fires due to heat
generation.
Do not handle the power plug with wet hands.
Doing so may result in electric shocks.
•
•
•
4
Check the unit
1. Make sure there are no tears or rips in the fabric.
Warning
Lift the back cushion and make sure the fabric on
the backrest is not torn. (Even if it is torn very
slightly, stop using the unit immediately, remove
the power plug, and request repairs.)
Using the unit with the fabric torn may result in injury
or electric shocks.
•
Check
Fabric Check
Backrest
Back cushion