9
Engli
sh
AC operation
If you connect the AC adaptor to the appliance in the same
way as for charging, and turn on the power, you can use it.
• If the remaining battery is too low, the blades may move
slowly or stop, even with the AC operation. In this case,
charge the battery for 1 minute or more.
• The battery will be discharged, even with the AC operation.
How to use
• Check that the blades are not damaged or deformed before use.
• Turn the appliance off.
• Apply the lubrication oil to the blade before and after each
use. (See page 11.)
• The appliance may not operate in an ambient temperature
lower than approximately 5 °C.
1
Set the trimming height.
2
Turn on the power.
Do not forcefully press the main body on skin
because it may cause injury or scratch the
skin when holding main body up side down
for edge cutting the sideburns or nape.
Setting the trimming height
For a trimming height of 0.3 mm
to 1.5 mm, turn the dial to the
desired height.
Use an attachment for a
trimming height higher than
1.5 mm or more.
1.2
Trimming
height
indicator
0.3
0.6
0.9
1.2
1.5
►
How to use the 1.5 mm comb attachment for fading
•
Adjustable from 1.5 to 2.7 mm, in five 0.3 mm steps, with the
1.5 mm comb attachment for fading.
1.2
Indication
0.3
0.6
0.9
1.2
1.5
Trimming
height
1.5
1.8
2.1
2.4
2.7
• The comb attachment for fading is for this appliance only.
Removing and mounting the comb attachments
►
Mounting the attachment
1. Select the trimming heights
indicated on the insides and sides
of the attachments.
2. Set the dial to “0.3” and then
mount the attachment to the main
body as illustrated.
0.3
0.3
►
Removing the attachment
Slide one side of the attachment off
the mounting in the direction
indicated with the arrow.
