15
English
Dry cleaning [
BCDFH
]
Epilation head/Shaver head
1. Lift fast/gentle caps,
the frame upward while
holding the cap release
rib [
BC
2
]/the frame
release rib [
F
6
] or
remove the frame by
pushing the frame
release button [
H
].
2. Clean the gentle cap [
C
], the
epilation head [
D
,
F
] and the
shaver head [
H
] with the
cleaning brush [
K
].
Wet cleaning [
BCDFH
]
Epilation head/Shaver head
1. Wet the discs and blades, and then apply
liquid hand soap.
2. Turn the switch on and then foam is
created.
3. Wash the head with water to wash out hair.
•
Do not use hot water.
•
If soap is not completely washed away, then a
white deposit can accumulate and prevent the
discs and the blades from moving smoothly.
•
Rinse the shaver head with the frame
removed.
4. Turn the switch off, wipe the appliance with a dry cloth
and dry it well.
Replacing the outer foil
We recommend replacing the outer foil [
H
9
]
every year
and
the inner blade
every two years
. Remove the outer foil of the
shaver head [
H
] only when replacing it.
1. While pushing the outer foil gently with the fingers, use a
fingernail to release the plastic panel (
b
) on the blade
from the hooks (
a
) on the inside of the frame.
2. The new outer foil should be slightly bent and pushed in
until it is hooked in the frame.
1
2
ES-ED70_ME.indb 15
2014/01/23 13:08:32
