36
Engli
sh
Foot care head
1. Apply liquid hand soap to the central part of the
file.
2. Pour a small amount of water on the file and turn
the switch on.
3. Rinse any debris thoroughly with water or
lukewarm water.
4. After turning the switch off, remove the frame and
rinse inside.
5. Wipe with a dry cloth and dry in a well-ventilated
location.
3
4
5
Replacing the outer foil
We recommend replacing the outer foil [
H
9
]
every year
and the inner blade
every two years
. Remove the outer
foil of the shaver head [
H
] only when replacing it.
1. While pushing the outer foil gently with the fingers,
use a fingernail to release the plastic panel (
b
) on
the blade from the hooks (
a
) on the inside of the
frame.
2. The new outer foil should be slightly bent and
pushed in until it is hooked in the frame.
1
2
Replacing the file
The file lifetime is approximately 1 year (assuming a single
use every 2 weeks with approximately 10 minutes per
use). We recommend replacing the file about once a year.
1. Press down with your finger and release the file.
2. Align the
shaped part with the mark side and
press down.
ES-ED90_CH.indb 36
2013/03/11 13:56:29
