36
English
Using the lock ring
Use the lock ring to lock or unlock the power switch.
Rotate the lock ring until it clicks.
Rotate the lock ring to “ ” to unlock the
power switch:
Used when shaving, washing the shaver,
lubricating the shaver.
Rotate the lock ring to “ ” to lock the
power switch:
Used when carrying the shaver.
Charge
Charging using the self‑cleaning recharger
Thoroughly wipe off any drops of water on or around
the self‑cleaning recharger so that it is dry before
charging the shaver.
1
1
Insert the appliance plug into
the self‑cleaning recharger.
2
2
Remove the protective cap
and then attach the shaver.
•
Turn the shaver off before
attaching.
•
Wipe off any water droplets
on the main body rear
terminals.
1
2
3
•
Check that the outer foil is not deformed or
damaged when you are attaching the shaver.
3
3
Plug in the adaptor into a household outlet.
•
The “Charge” mode starts when attaching the
shaver.
•
Check that the charge status lamp ( ) glows.
•
Charging is completed after approx. 1 hour.
The charging time may decrease depending on
the charging capacity.
While charging
After charging is
completed
The charge status lamp
( ) glows.
The number of the
battery capacity lamp will
increase as charging
progresses.
The battery capacity
lamp and the charge
status lamp will light up
and then turn off after
5 seconds.
Abnormal charging
The charge status lamp ( ) will blink twice every
second.
ES-LV94_CH.indb 36
2013/07/22 9:39:28