43
English
The mark on the left means suitable for
cleaning under an open water tap.
Warning
Disconnect the cord from the shaver before
cleaning it in water to prevent electric shock.
►
Drying the shaver with the self‑cleaning
recharger
1. Attach the outer foil section to the shaver.
2. Dry the shaver with self‑cleaning recharger using
“Dry/Charge” mode.
3. Lubricate the shaver.
Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is
used.
1. Switch off the shaver.
2. Apply one drop of oil to each
of the outer foils.
3. Raise the trimmer and apply
a drop of oil.
4. Switch the shaver on, and run
it for approximately five
seconds.
3
2
5. Switch off the shaver, and wipe off any excess oil
from the outer foils with a soft cloth.
Cleaning with the brush
►
Cleaning with the long brush
Clean the system outer
foil (
a
), the shaver body
(
b
) and the trimmer (
c
)
using the long brush.
►
Cleaning with the short brush
Clean the inner blades using the short
brush by moving it in direction (A).
•
Do not move the short brush in direction
(B) as it will damage the inner blades
and affect their sharpness.
•
Do not use the short brush to clean the
outer foils.
(A)
(B)
Replacing the system outer foil and the inner blades
appears on the lamp display once a year. (This will
differ depending on usage.) We recommend checking
the system outer foil and the inner blades when it
appears.
Press the power switch for more than 30 seconds to
turn off .
system outer foil once every year
inner blades
once every two years
ES-LV94_CH.indb 43
2013/07/22 9:39:30
