English
16
·
Adequate ambient temperature for using is 0 - 35°C.
If you use the appliance in temperature outside of the
recommended range, it may stop functioning.
Start out shaving by applying gentle pressure to your
face. Stretch your skin with your free hand and move
the shaver back and forth in the direction of your
beard. You may gently increase the amount of pres-
sure as your skin becomes accustomed to this shaver.
Applying excessive pressure does not provide a closer
shave.
Cleaning
Cleaning with the brush
Use the included cleaning brush
to remove any tiny debris from
the inner blade, outer foil, or main
body.
Move the cleaning brush as shown
in Figure A at right to clean the
inner blade.
Do not move the cleaning brush
in direction (B) as it will damage
the inner blade and affect their
sharpness.
(
A
)
(
B
)
Replacing the outer foil and the inner
blades
Outer foil
Once every year
Inner blade
Once every two years
·
When charging the shaver for the first time or
when it has not been in use for more than 6
months, the operating time may shorten. Please
charge it for more than 16 hours in such case.
4.
Disconnect the power plug after
charging.
·
Recommended ambient temperature
for charging is 0 - 35°C. The battery
may not charge properly or may not
charge under extreme low or high
temperatures.
5.
While holding the power plug lock
release button pressed, push the
power plug back into its storage
position.
Shaving
Using the shaver
0
1
Depress the switch lock
button and slide the
power switch upwards.
2
Hold the shaver as
illustrated above and
shave.