16
English
Warning
Disconnect the cord from the shaver before cleaning it in
water to prevent electric shock.
►
Drying the shaver with the self-cleaning recharger
1. Attach the outer foil section to the shaver.
2. Dry the shaver with self-cleaning recharger using “Dry/Charge”
mode.
3. Lubricate the shaver.
Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of the
outer foils.
3. Raise the trimmer and apply a drop
of oil.
4. Switch the shaver on, and run it for
approximately five seconds.
3
2
5. Switch off the shaver, and wipe off any excess oil from the outer
foils with a soft cloth.
Cleaning with the brush
►
Cleaning with the long brush
Clean the system outer foil
(
a
), the shaver body (
b
) and
the trimmer (
c
) using the
long brush.
►
Cleaning with the short brush
Clean the inner blades using the short brush by
moving it in direction (A).
•
Do not move the short brush in direction (B) as
it will damage the inner blades and affect their
sharpness.
•
Do not use the short brush to clean the outer
foils.
(A)
(B)
Replacing the system outer foil and the inner blades
appears on the lamp display once a year. (This will differ
depending on usage.) We recommend checking the system outer
foil and the inner blades when it appears.
Press the power switch for more than 30 seconds to turn off .
system outer foil
once every year
inner blades
once every two years
►
Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
►
Attaching the outer foil section
After turning the foil frame mark (
) to the front,
securely attach the outer foil section to the shaver
until it clicks.
ES-TLVK6_ASIA.indb 16
2015/06/08 13:23:05
