9
English
3
3. Turn the switch on and then wet the discs to
create foam.
4
4. Wash the head with water to wash out
hair.
Do not use hot water.
If soap is not completely washed away,
then a white deposit can accumulate
and prevent the discs from moving
smoothly.
5. Turn the switch off, wipe the appliance
with a dry cloth and dry it well.
Foot care head
1. Apply liquid hand soap to the central part of the file.
2. Pour a small amount of water on the file and turn the
switch on.
3
3. Rinse any debris thoroughly with water or
lukewarm water.
•
•
4
4. After turning the switch off, remove
the frame and rinse inside.
5
5. Wipe with a dry cloth
and dry in a well-
ventilated location.
Replacing the file
The file lifetime is approximately 1 year (assuming a single use
every 2 weeks with approximately 10 minutes per use). We
recommend replacing the file about once a year.
1. Press down with your finger and release the file.
2. Align the
shaped part with the
mark side and press
down.
