12
English
Wet cleaning
Epilation head/Shaver head
1. Lift the frame, fast/gentle/beginner caps upward while
holding the frame release rib [
B
3
]/the cap release rib
[
CDE
7
] or remove the frame by pushing the frame
release button [
H
].
2
2. Apply liquid hand soap to the discs and the
blades.
3
3. Turn the switch on and then wet the discs and
the blades to create foam.
4
4. Wash the head with water to wash out
hair.
• Do not use hot water.
• If soap is not completely washed away,
then a white deposit can accumulate
and prevent the discs and the blades
from moving smoothly.
5. Turn the switch off, wipe the appliance
with a dry cloth and dry it well.
Foot care head
1. Apply liquid hand soap to the central part of the file.
2. Pour a small amount of water on the file and turn the
switch on.
3
3. Rinse any debris thoroughly with water or
lukewarm water.
4
4. After turning the switch off, remove
the frame and rinse inside.
5
5. Wipe with a dry cloth
and dry in a well‑
ventilated location.
ES-WD94_AM.indb 12
2011/12/16 19:12:37
