6
English
2
2
Wet your skin.
Shaving with soap lather makes the skin slippery for a closer
shave.
Do not use shaving cream, skin cream or skin lotion as it will
clog the blades.
3
3
Press the 0/1 switch [
F
] to turn on the power.
Press gently so that the whole blade is in close contact with
the skin and the surface of the blade does not move up and
down.
Dry shaving
You can also shave without wetting your skin or the discs.
Cleaning
Always clean the frames and discs after use to keep them in a
hygienic state.
Switch off and unplug the appliance before cleaning.
Wet cleaning
1. Remove the frame by pushing the frame release rib [
C
9
] /
frame release button(s) [
B
4
,
E
].
2. Apply liquid hand soap to the discs and the blades.
3. Turn the switch on and then wet the discs and the blades to
create foam.
4. Wash the head with water to wash out hair.
Do not use hot water.
If soap is not completely washed away, then a white deposit
can accumulate and prevent the discs and the blades from
moving smoothly.
5. Turn the switch off, wipe the appliance with a dry cloth and dry
it well.
•
•
•
•
•
1
2-4
Dry cleaning
You can also clean the epilation head [
B
,
C
] (ES2064/ES2067) and
the shaver head [
E
] (ES2067 only) with the cleaning brush [
I
].
Replacing the outer foil (ES2067 only)
We recommend replacing the outer foil [
E
;
] every year and the
inner blade every two years. Remove the outer foil of the shaver head
[
E
] only when replacing it.
1. While pushing the outer foil gently with the fingers, use a
fingernail to release the plastic panel (
b
) on the blade from
the hooks (
a
) on the inside of the frame.
2. The new outer foil should be slightly bent and pushed in until
it is hooked in the frame.
