10
English
Caution for turbo mode
Shaving in turbo mode may damage your skin. Turn the shaver
off and then on again to cancel turbo mode.
Do not place your fingers on the OFF/ON switch while using
the shaver. This may cause the shaver to turn off or enter turbo
mode. Place your fingers on the finger rest while using the
shaver.
•
•
Replacing the system outer foil and the inner
blades
appears on the LCD panel once a year. (This will differ
depending on usage.) We recommend checking the system outer
foil and the inner blades when it appears.
Press the OFF/ON switch for more than 30 seconds to turn off .
system outer foil
once every year
inner blade
once every two years
1. Press the system outer foil
release buttons and lift the
system outer foil upwards as
illustrated.
2. Remove the inner blades one
at a time as illustrated.
Do not touch the edges
(metal parts) of the inner
blades to prevent injury to
your hand.
3. Insert the inner blades one at
a time until they click as
illustrated.
•
2 3
•
4. Insert the system outer foil by
pushing it downwards until it
clicks.
Cleaning the self-cleaning recharger
Beard trimmings may become attached to the cleaning tray of the
self-cleaning recharger. Follow the steps below to remove them.
We recommend doing this each time you change the detergent
cartridge.
1. Be sure to remove the water
tank and the appliance plug
from the self-cleaning
recharger.
Be careful not to spill the
cleaning liquid.
•
