Panasonic ET-DLE035, Operating Instructions Manual

4-ENGLISH

Before replacing the projection lens

Return the projection lens to the home position before replacing or removing it.

For details on how to return the lens to the home position, refer to the operating instructions of the projector.

Attention

z

Make sure that the projector power supply is switched off before attaching or detaching the projection lens.

z

After removing the projection lens, store it safely away from vibration or impacts.

z

Do not touch the electric contact points of the projection lens with your fingers. Dust and dirt on the contacts 

may cause contact malfunctions. 

z

Before attaching the Fixed-focus lens, remove the protective film from the light projecting surface and the lens 

cap from the lens.

Lens surface

Light 

projecting 

surface

Lens cap

Protective film

z

Be sure not to touch the light projecting surface or the surface of the lens. Any fingerprints or smudges on 

these surfaces will be magnified and lower the quality of the image displayed on the screen.

z

The light projecting surface and lens are made of glass. The lens could be damaged if brought into contact 

with or rubbed against hard objects. Handle the lens carefully. 

z

Use a clean, soft, and dry cloth to wipe away dust and dirt from the light projecting surface and projection lens.  

Do not use fluffy cloths containing oil, water or dust for cleaning.

z

When the Fixed-focus lens is removed from the projector, place it with the light projecting surface facing 

downwards.

Attaching the Lens / Detaching the Lens

Before Use



Supported projectors

PT-RZ120 / PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ870 / PT-RZ770 / PT-RW730 / PT-RZ660 / PT-RW620 / 

PT-DZ870 / PT-DW830 / PT-DX100 / PT-DZ780 / PT-DW750 / PT-DX820

Note

z

Models other than the above may also be supported.  Refer to the operating instructions of the projector you are using.

z

In this document, the alphabet letters at the end of the projector part numbers are omitted.



Supplied Accessories

Make sure that the following has been provided. Numbers enclosed in < > show the number of accessories.

Lens cap <1>

Lens shift gauge <1>

(The product is 

delivered with a lens 

cap attached.)