Panasonic ET-DLE035, Operating Instructions Manual

ENGLISH-9

Lens position setup and focus adjustment

Lens position setup

z

When using PT-RZ120

When moving the lens position to the home position, perform the operation with the following procedure.

1) 

Turn on the projector to start the 

projection.

2) 

Press the <MENU> button to 

display the [MAIN MENU] screen.

3) 

Select [PROJECTOR SETUP] in 

the main menu and then press the 

<ENTER> button.

4) 

Select [LENS] in the [PROJECTOR 

SETUP] menu and then press the 

<ENTER> button.

z

The [LENS] screen appears.

5) 

Select [LENS TYPE] on the [LENS] 

screen and then use the 

◄►

buttons to select [ET-DLE035].

z

Each press of the 

◄►

 buttons switches the 

item to [NORMAL] or [ET-DLE035].

6)  S

elect [LENS HOME POSITION] on 

the [LENS] screen and then press 

the <ENTER> button.

z

 A confirmation screen appears.

7) 

Use the ◄► buttons to select [OK] 

and then press the <ENTER> 

button.

z

[PROGRESS] is displayed on the [HOME 

POSITION] screen and the projection lens 

moves to the home position.

MAIN MENU

PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION

PROJECTOR SETUP

TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK

MENU SELECT
SUB MENU

ENTER

1/2

1/2

MENU SELECT
SUB MENU

PROJECTOR SETUP

PROJECTOR ID

ALL

PROJECTION METHOD

LENS

OPERATION SETTING

NORMAL

LIGHT OUTPUT

100.0%

BRIGHTNESS CONTROL

AUTO

STANDBY MODE

NORMAL

QUICK STARTUP

OFF

NO SIGNAL SHUT-OFF

DISABLE

NO SIGNAL LIGHTS-OUT

DISABLE

ENTER

MENU SELECT
CHANGE

LENS
LENS TYPE

NORMAL

LENS HOME POSITION
LENS CALIBRATION

Note

z

If [LENS TYPE] is mistakenly set to [NORMAL], the projection lens will not move to the correct home position.