background image

 

4 - ENGLISH

Before Use

Detaching the lens / Attaching the lens

Before replacing the projection lens

Return the projection lens to the home position before replacing or removing it.

For details on how to return the lens to the home position, refer to the operating instruc-

tions of the projector.

Attention

 

z

Make sure that the projector power supply is switched off before attaching or detaching the 

projection lens.

 

z

After removing the projection lens, store it safely away from vibration or impacts.

 

z

Before attaching the lens, be sure to remove the two lens caps (1 each for front and rear) 

attached to the lens.

 

z

Do not touch the electric contact points of the projection lens with your fingers. Dust and dirt on 

the contacts may cause contact malfunctions.

 

z

Do not touch the surface of the lens with bare hands. Finger prints and dirt on the surface of 

the lens will be magnified by the lens and lower the quality of the projected image. Place the 

supplied lens cap on the zoom lens when the projector is not in use.

 

z

The lens is made of glass. The lens could be damaged if brought into contact with or rubbed 

against hard objects. Handle the lens carefully.

 

z

Use a clean, soft and dry cloth to wipe away dust and dirt from the lens. 

Do not use fluffy cloths containing oil, water or dust for cleaning. The material in the lens is 

easily damaged, so do not apply excessive pressure when wiping it.

 

J

Supported projectors

PT-SLZ71C, PT-SLW77C, PT-SLW67C, PT-SLX74C, PT-SLX64C

Note

 

z

Models other than the above may also be supported. Refer to the operating instructions of the 

projector you are using.

 

z

In this document, the alphabet letters at the end of the projector part numbers are omitted.

 

J

Supplied Accessories

Make sure that the following has been provided.

Part name

Appearance (quantity)

Lens cap

    Rear

 Front  

 

z

The product is delivered with a lens 

cap attached.

 

z

The shape and size of the lens caps 

are different for each product.

(1 each for front and rear)

Note

 

z

The illustrations in this manual may differ from the actual product.

Summary of Contents for ET-ELT30C









Reviews: