6-ENGLISH
■
Supported projectors
PT-MZ20K / PT-MZ17K / PT-MZ14K / PT-MZ11K / PT-MZ16K / PT-MZ13K / PT-MZ10K
Note
z
This manual omits the alphabets at the end of projector model numbers.
z
Models other than the above may also be supported. Refer to the operating instructions of
your projector or visit the following website.
https://panasonic.net/cns/projector/
z
Some projection lens cannot be used depending on the firmware version of the projector.
Update the firmware to the latest version first in the case below.
For the updating procedure, refer to "Updating the firmware" (
Operating Instructions –
Functional Manual: Chapter 5).
Firmware of the latest version can be downloaded from the following website.
https://panasonic.net/cns/projector/pass/
g
ET-EMS650 / ET-EMT750 / ET-EMT850
If the main version of the firmware of the PT-MZ16K / PT-MZ13K / PT-MZ10K is less than 1.25
or less than 2.13
If the firmware version of the PT-MZ17K / PT-MZ14K / PT-MZ11K is less than 1.10
g
ET-
EMU100
If the main version of the firmware of the PT-MZ16K / PT-MZ13K / PT-MZ10K is less than 1.23
or less than 2.10
■
Supplied Accessories
Make sure that the following has been provided.
Part name
Appearance (quantity)
Lens cover
1 each for front and rear
Lens fixing screw
(DPHD1008ZA/X1)
x4
Hex driver
x1
z
The product is delivered with lens
covers attached.
z
The shape and size of the lens
covers are different for each pro-
duct.
z
Supplied only with the ET-EMU100.
The product may be delivered with
the lens fixing screws attached.
z
Used when attaching the projection
lens to the projector.
z
Supplied only with the ET-EMU100.
z
Used when attaching the projection
lens to the projector.
Before Use
Summary of Contents for ET-EMS650
Page 19: ...ENGLISH 19 MEMO ...