3
Product description
This is a ceiling mount bracket for installing projectors.
■
Applicable ceiling bracket: ET-PKD77H, ET-PKD75S, TY-PKD75S, ET-PKD100H, ET-PKD100S,
ET-PKD56H, ET-PKD55S, TY-PKD55S
■
Structural components
Parts name
Sub-components (number of parts)
Applications
Projector
mount bracket
The main projector body is mounted to
this bracket, which is then attached to a
ceiling bracket that has been mounted
in advance on the ceiling. Has an
adjustment mechanism allowing tilting
to the left and right.
Screws and bolts
Hex head bolt, captive washer
(M6 × 16) 5 pieces
Used for mounting the projector onto
the projector mount bracket.
Drop prevention set
Wire rope x 2
M8 flat washer x 4
Wire rope fixing screw
(
Screw, captive washer (M6 x 20
))
x 2
Prevents the projector from falling.
■
The user must also obtain the following parts. (commercially-available)
Installation work
Required parts
Page
Attaching the drop prevention set
(bolt diameter: M8)
Anchoring nut or curled plug (M8 or 5/16") (× 2),
Hex head bolt (× 2), Spring washer (× 2)
13
z
Store small parts in an appropriate manner, and keep them away from young children.
z
Tightening torques for the screws are, M6: 4 ± 0.5 N•m, M8 (and 5/16") : 10 ± 1 N•m.
z
Use a torque screwdriver or torque wrench to tighten screws and bolts to their specified tightening torques.Do
not use electric screwdrivers or impact screwdrivers.
z
If metal parts are no longer being used, they should be removed by a qualified technician as soon as possible.
x 1
Important Safety Notice (Continued)
When installing, always use the supplied components.
z
Otherwise, this may cause damaged projector to fall and cause injury.
Do not hang from or hang objects on the projector or ceiling mount bracket.
z
The projector may fall and cause injury.
Install the mounting screws and power cable in such a way that they will not make
contact with the inside parts of the ceiling.
z
Electric shocks may result from contact with any metal objects inside the ceiling.
