10 -
ENGLISH
Installation
After checking the height, width, and structure of the installation location while referring to “Standard installation
dimensions” on pages
5 to 9
, determine the appropriate positions for setting up the screen and installing the
projector.
Setting up the screen
Set up the screen according to the specified method in a position which takes into account the projection distance
and angle and the type of screen being used.
Screws tightening torques
M6
.........
4±0.5 N•m
M8
.........
10±1 N•m
z
Use a torque screwdriver or torque wrench to tighten screws and bolts to their specified tightening torques. Do
not use electric screwdrivers or impact screwdrivers.
Installing the bracket to the projector
Attach the projector mount bracket to the projector (sold separately).
1) Place the projector upside-down onto a piece of
soft material.
2) Turn the adjustment leg (see the figure on the
left) clockwise to minimize the length of the leg.
z
If the adjustment leg (see the figure on the
left) is long, the projector mount bracket
comes in contact with the leg and cannot be
mounted onto the projector.
Projector mount bracket
Arrow
Secure in six places
3) Secure the projector mount bracket to the
bottom of the projector using the six supplied
captive washer screws (M6 x 16) as illustrated
on the left.
