ENGLISH - 7
Installation
After checking the height, width and structure of the installation location while referring to the “Dimensional
relationship diagram” (pages 5-6) and “Dimensional relationship” in the Appendix, determine the appropriate posi-
tions for setting up the screen and installing the projector.
Setting up the screen
Set up the screen according to the specified method in a position which takes into account the projection distance
and angle and the type of screen being used.
Screws tightening torques
M6............4 ± 0.5 N•m
z
Use a torque screwdriver or torque wrench to tighten screws and bolts to their specified tightening torques. Do
not use electric screwdrivers or impact screwdrivers.
Installing the bracket to the projector
Attach the projector mount bracket to the projector (sold separately).
Adjustable feet
1 Place the projector upside down on top of
a soft cloth.
2 Turn the adjustable feet (as shown on the
left) clockwise to minimize the length of the
feet.
Projector mount
bracket
3 Secure the projector mount bracket to
the bottom of the projector using the four
supplied captive washer hex head bolts
(M6×16) as illustrated on the left.
Captive washer
hex head bolts
(M6×16)
Summary of Contents for ET-PKE300B
Page 11: ...ENGLISH 11 MEMO ...
