Panasonic ET-PKE300B, Installation Instructions Manual

8 - ENGLISH

Attaching the projector drop-prevention kit

Secure the wire rope to the projector (sold separately).

Attention

z

For the combination of the projector with the ceiling mount bracket (for low ceilings) ET-PKD120S (sold 

separately) and the ceiling mount bracket (for high ceilings) ET-PKD120H (sold separately), and the mounting 

of the wire rope to the ceiling, please refer to the installation instructions of the ceiling mount bracket ET-

PKD120S (for low ceilings) and ET-PKD120H (for high ceilings).

(when using the ceiling mount bracket ET-PKD120S (for low ceilings))

Wire 

rope

Flat washer

Captive 

washer

screw

A

A

1   Secure one end of the 

wire rope 

with a 

captive washer screw (M6×20) to “A” on the 

projector as shown on the left.

Attention

z

Be sure to use the supplied flat washers and 

wire rope.

z

At this step, please keep the wire rope 

through the opening of the mounting bracket 

base. 

Note

z

One of the two supplied washers with this 

product is for the fixing of the wire rope to the 

projector and the other is for the fixing of the 

wire rope to the ceiling. 

2   Mount the projector with the ceiling mount 

bracket ET-PKD120S (for low ceilings) to 

the angle adjusting bracket. 

Attention

z

At this step, please keep the wire rope 

through the opening of the angle adjusting 

bracket.

A

A

Angle adjusting bracket

Wire rope

A

Attachment plate

Angle adjusting 

bracket

Wire rope

3   Mount the projector to the ceiling.

Attention

z

For the combinatioin of this projector and 

the ceiling mount bracket (sold separately), 

please refer to the installation instructions of 

the ceiling mount bracket ET-PKD120S (for 

low ceilings).

4   Pass the wire rope through the hole as 

shown in the figure on the left.

 Installation (continued)