6 - ENGLISH
Note
z
This illustration assumes that the projector will be installed so that the projected image fills the screen and
properly aligned with it.
z
This drawing is not in exact scale.
SH
Height of the projection area
L(LW/LT)*
1
Projection distance
SW
Width of the projection area
H
Distance from the center of lens to the image
upper end
SD
Diagonal length of the projection area
*1: LW : Minimum distance; LT : Maximum distance
Note
z
Depending on the product, the appearance may differ from the illustrations in these installation instructions.
Attention
z
Install the projector at least 500 mm (19-11/16") on the air intake ports (1,000 mm (39-3/8") on the exhaust port
side) away from the surrounding walls or objects in order to ensure that the air intake/exhaust ports of the pro-
jector will not be blocked.
z
Avoid setting up in places which are subject to sudden temperature changes, such as near an air conditioner or
lighting equipment (studio lamps, etc.).
■
Dimensional relationship
For the formula of the projection distance (L), refer to the appendix at the end of this instruction.
Standard installation dimensions (continued)
Standard installation dimensions (continued)
