8
- ENGLISH
Installation (continued)
<For PT-VW355N, PT-VW350, PT-VX425N, PT-VX420, PT-VX421; PT-VW360, PT-VX430, PT-VX431K>
A
A
Wire rope
Wire
rope
Screw, captive
washer
(M4
x
12)
Screw, captive
washer
Note
z
For the position of A of the PT-VW355N,
PT-VW350, PT-VX425N, PT-VX420, PT-VX421;
PT-VW360, PT-VX430, PT-VX431K models, refer
to the image on the left.
<For PT-LRZ35, PT-LRZ35U, PT-LRW35, PT-LRW35U>
A
A
Wire rope
Wire
rope
Screw, captive
washer
(M4
x
12)
Screw, captive
washer
Note
z
For the position of A of the PT-LRZ35, PT-LRZ35U,
PT-LRW35, PT-LRW35U models, refer to the image
on the left.
Installing the bracket to the projector
Install the bracket to the projector (sold separately) by following the procedure below.
<
For PT-VZ585N, PT-VZ575N, PT-VZ580, PT-VZ570, PT-VW545N, PT-VW535N, PT-VW540, PT-VW530, PT-VX615N,
PT-VX605N, PT-VX610, PT-VX600, PT-VX61K, PT-VX60, PT-VX51K, PT-VX50, PT-VMZ60, PT-VMZ50, PT-VMZ40,
PT-VMW60, PT-VMW50, PT-VMZ601K, PT-VMZ501K, PT-VMZ401K, PT-VMW601K, PT-VMW501K / PT-VGZ601K>
Projector
mount
bracket
Captive washer
screws (M4 × 10)
Wire rope
The illustration is an example when it is attached to
PT-VZ585N.
1 Pass the wire rope through the hole of the projector
mount bracket as illustrated on the left.
2
Secure the projector mount bracket to the bottom of
the projector using the 4 supplied captive washer
screws (M4 × 10) as illustrated on the left.
Wire rope
