ENGLISH - 9
Installation (continued)
<For PT-VW355N, PT-VW350, PT-VX425N, PT-VX420, PT-VX421; PT-VW360, PT-VX430, PT-VX431K>
Projector
mount
bracket
Captive washer
screws (M4 × 10)
Wire rope
Screw
position
1 Secure the projector mount bracket to the bottom of
the projector using three supplied captive washer
screws (M4 × 10) as illustrated on the left.
z
Use three of the four captive washer screws sup-
plied with this product.
<For PT-LRZ35, PT-LRZ35U, PT-LRW35, PT-LRW35U>
Projector
mount
bracket
Captive washer
screws (M4 × 10)
Wire rope
Screw
position
1 Pass the wire rope through the hole of the projector
mount bracket as illustrated on the left.
2
Secure the projector mount bracket to the bottom of
the projector using the 4 supplied captive washer
screws (M4 × 10) as illustrated on the left.
Wire rope
Attention
z
For information on how to join this product to the ceiling mount bracket (for low ceilings) (separately sold) or the
ceiling mount bracket (for high ceilings) (separately sold) and how to attach the wire rope in the ceiling, refer to
the installation instructions or other instructions supplied with the ceiling mount bracket (for low ceilings) or the
ceiling mount bracket (for high ceilings).
Screw
position
