background image

4 - ENGLISH

Read this first!

FCC NOTICE (USA)

Verification

Model Number:  

ET-RPS100G

Trade Name:  

Panasonic

Responsible Party:   Panasonic Corporation of North America

Address: 

Two Riverfront Plaza, Newark, NJ 07102-5490

Telephone number:   (877)803-8492

E-mail:  

projectorsupport@us.panasonic.com

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

To assure continued compliance, follow the attached installation instructions and do not make any unauthorized 

modifications.

Caution:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 

when the equipment is operated in a commercial environment. This equipment generates, uses, and can 

radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may 

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely 

to cause harmful interference in which case the user will be required to correct the interference at his own 

expense.

NOTIFICATION (Canada)

This class A digital apparatus complies with Canadian ICES-003.

Product information (for Turkey only)

EEE  Yönetmeliğine Uygundur.

EEE  Complies with Directive of Turkey.

Summary of Contents for ET-RPS100G













Reviews: